Peer
Reviewed Journal Publications
Hamshaw, S. D., Dewoolkar, M. M., Schroth, A. W., Wemple, B. C.,
and Rizzo, D. M. (2018), “A new machine-learning approach for classifying hysteresis in
suspended-sediment discharge relationships using high-frequency monitoring
data," Water Resources Research,
doi: 10.1029/2017WR022238.
Oka,
L. G., Dewoolkar, M., and Olson, S. M. (2018), “Comparing laboratory-based
liquefaction resistance of a sand with non-plastic fines with shear wave
velocity-based field case histories,” Soil
Dynamics and Earthquake Engineering, 113, 162-173.
Frolik,
J., Lens, J. E., Dewoolkar, M. M., and Weller, T. M. (2018), "Effects
of soil characteristics on passive wireless sensor interrogation," IEEE
Sensors Journal, 18(8), 3454-3460.
Hayden,
C., Purchase-Sanborn, K., and Dewoolkar, M. M. (2018), "Comparison of
site-specific and empirical correlations for drained residual shear
strength," Geotechnique, https://doi.org/10.1680/jgeot.17.p.200.
Dewoolkar, M. M., Edwards, M. B., and Walsh, D. (2018), "Strength and stiffness characterization of lunar simulant GRC-3," Journal of Aerospace Engineering, 31(4): 04018024.
Underwood,
K. L., Rizzo, D. M., Schroth, A. W., and Dewoolkar, M. M. (2017),
"Evaluating spatial variability in sediment and phosphorous
concentration-discharge relationships using Bayesian inference and
self-organizing maps," Water Resources Research, 10.1002/2017WR021353, onlinelibrary.wiley.com/doi/10.1002/2017WR021353/full
Alghamdi,
S., Tan, T., Hale-Sills, C., Vilmont, F., Xia, T., Yang, J., Huston,
D., and Dewoolkar, M. (2017), "The achilles heel of nacre: catastrophic
failure of nacre under pure shear stresses of torsion," Scientific Reports, 7: 13123, https://www.nature.com/articles/s41598-017-13492-z
Hamshaw,
S. D., Bryce, T., Rizzo, D. M., O'Neil-Dunne, J., Frolik, J., and
Dewoolkar, M. M. (2017), "Quantifying streambank movement and topography using
unmanned aircraft system photogrammetry with comparsion to
terrestrial laser scanning," River Research and Applications, http://onlinelibrary.wiley.com/doi/10.1002/rra.3183/epdf.
Anderson, I. A.,
Rizzo, D. M., Huston, D. R., and Dewoolkar, M. M. (2017), “Analysis of bridge
and stream conditions of over 300 Vermont bridges damaged in Tropical Storm
Irene,” Structure and Infrastructure Engineering, 13(11) http://dx.doi.org/10.1080/15732479.2017.1285329.
Anderson, I.,
Rizzo, D. M., Huston, D. R., and Dewoolkar, M. M. (2017), “Stream power
application for bridge-damage probability mapping based on empirical evidence
from Tropical Storm Irene,” Journal of Bridge Engineering, 22(5), http://ascelibrary.org/doi/10.1061/%28ASCE%29BE.1943-5592.0001022.
Brand, M. W.,
Dewoolkar, M. M., and Rizzo, D. M. (2017), “Use of sacrificial embankments to
minimize bridge damage from scour during extreme flow events,” Natural
Hazards, 87(3), 1469-1487, https://link.springer.com/article/10.1007/s11069-017-2829-z.
Edwards, M. B.,
Dewoolkar, M. M., Huston, D. R., Creager, C. (2017), “Bevameter testing on
simulant Fillite for planetary rover mobility applications,” Journal of
Terramechanics, 70, 13-26, http://www.sciencedirect.com/science/article/pii/S0022489816300635.
Grover, D.,
Savidge, C. R., Townsend, L., Rosario, O., Hu, L.-B., Rizzo, D. M., and
Dewoolkar, M. M. (2016), "Surface permeability of natural and engineered
porous building materials," Construction and Building Materials, 112,
1088-1100, http://www.sciencedirect.com/science/article/pii/S0950061816302525.
Howard,
L. J., Anderson, I. A., Underwood, K., Dewoolkar, M. M., Deschaine, L.
M., and Rizzo, D. M. (2016), "Heuristic assessment of bridge scour
sensitivity using differential evolution: case study for linking
floodplain encroachment and bridge scour," Environmental Systems
Research, 5:20, DOI 10.1186/s40068-016-0071-4.
Edwards, M. B.,
Dewoolkar, M. M., and Huston, D. R. (2016), "Geotechnical properties of
Fillite - simulant for planetary rover mobility studies," Journal of
Aerospace Engineering, 29(5), http://ascelibrary.org/doi/abs/10.1061/(ASCE)AS.1943-5525.0000613.
Dewoolkar, M.
M., Hargy, J., Anderson, I., de Alba, P., and Olson, S. M. (2016),
"Residual and postliquefaction strength of a liquefiable sand," Journal
of Geotechnical and Geoenvironmental Engineering, 142(2), http://ascelibrary.org/doi/abs/10.1061/(ASCE)GT.1943-5606.0001374.
Anderson, L.,
and Dewoolkar, M. M. (2015), "Durability of fly ash pervious concrete for
freeze-thaw in a simulated field environment," ACI Materials Journal,
112(5), 603-611.
Gomez, B. W.,
Dewoolkar, M. M., Lens, J. E., and Benda, C. C. (2014), "Effects of fines
content on hydraulic conductivity and shear strength of granular structural
backfill," Transportation Research Record, No. 2462, 1-6.
Suozzo, M. J.,
and Dewoolkar, M. M., "Evaluation of strength and hydraulic testing
methods of pervious concrete," ACI Materials Journal, 111(1), 23-34.
Hu, L., Savidge,
C., Rizzo, D., Hayden, N. Hagadorn, W., and Dewoolkar, M., "Commonly used
porous building materials - geomorphic pore structure and fluid
transport," Journal of Materials in Civil Engineering, 25(12), http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29MT.1943-5533.0000706.
Suozzo, M. J.,
and Dewoolkar, M. M., "Long-term field monitoring and evaluation of
maintenance practices of pervious concrete pavements in Vermont,"
Transportation Research Record, No. 2292, Maintenance and Preservation, 94-103.
Oka, L. G., Dewoolkar,
M. M., and Olson, S. (2012), "Liquefaction assessment of cohesionless
soils in the vicinity of large embankments," Soil Dynamics and Earthquake
Engineering, 43, 33-44.
Bielefeldt, A.
R., Dewoolkar, M. M., Caves, K. M., Berdanier, B. W., and Paterson, K. G.
(2011), "Diverse models for incorporating service projects into
engineering capstone design courses," International Journal of Engineering
Education, 27(4), 1-15.
Hayden, N. J.m
Rizzo, D. M., Dewoolkar, M., Neumann, M. D., Lathem, S., and Sadek, A. (2011),
"Incorporating a systems approach into civil and environmental engineering
curricula: effect on course redesign, and student and faculty attitudes,"
Advances in Engineering Education, summer issue.
Dewoolkar, M.
M., Porter, D., and Hayden, N. J. (2011), “Service-learning in engineering
education and heritage preservation,” International Journal of
Architectural Heritage Conservation, Analysis and Restoration, 5, 613-628.
McCain, G. N.,
and Dewoolkar, M. M. (2010), "Porous concrete pavements: mechanical and
hydraulic properties," Transportation Research Record, No. 2164, Concrete
Materials, 66-75.
Dewoolkar, M.
M., George, L. A., Hayden, N. J., and Rizzo, D. M. (2009), “Vertical
integration of service-learning into civil and environmental engineering
curricula,” International Journal of Engineering Education, 56(6), 1257-1269.
Dewoolkar, M.
M., George, L. A., Hayden, N. J., and Neumann, M. (2009), “Hands-on
undergraduate geotechnical engineering modules in the context of effective
learning pedagogies, ABET outcomes, and curricular reform,” J. of Professional
Issues in Engineering Education and Practice, 135(4), 161-175.
George, L. A.,
Dewoolkar, M. M., and Znidarcic, D. (2009), “Simultaneous laboratory
measurements of acoustic and hydraulic properties of unsaturated soils,” Vadose
Zone Journal, 8(3), 633-642, doi: 10.2136/vzj2008.0139.
Dewoolkar, M.
M., Chan, A. H. C., Ko, H. Y., and Pak, R. Y. S. (2008), “Finite element
simulations of seismic effects on retaining walls with liquefiable backfills,”
International Journal for Numerical and Analytical Methods in Geomechanics,
33(6), 791-816, DOI: 10.1002/nag.748.
Dewoolkar, M.
M., Hwang, J., and Ko, H. Y. (2008), “Physical and finite element modeling of
lateral stability of offshore skirted gravity structures subjected to iceberg
impact load,” Ocean Engineering, 35(16), 1615-1626,
doi:10.1016/j.oceaneng.2008.08.005.
Doris, J. J.,
Rizzo, D. M., and Dewoolkar, M. M. (2007), “Forecasting vertical ground surface
movement from shrinking/swelling soils with artificial neural networks,”
International Journal for Numerical and Analytical Methods in Geomechanics,
32(10), 1229-1245, DOI: 10.1002/nag.666.
Dewoolkar, M.
M., Santichaianant, K., and Ko, H. Y. (2007), “Centrifuge modeling of granular
soil response over active circular trapdoors,“ Soils and Foundations, 47(5),
931-945.
Wei, C. and
Dewoolkar, M. M. (2006) “A simple formulation of capillary hysteresis with
internal state variables,” Water Resources Research, 42, W07405, 1-16.
Dewoolkar, M.
M., and Huzjak, R. J. (2005) “Drained residual shear strength of some
claystones from Front Range Colorado,” Journal of Geotechnical and
Geoenvironmental Engineering, 131(12), 1543-1551.
Dewoolkar, M.
M., Goddery, T., and Znidarcic, D. (2003) “Centrifuge modeling for undergraduate
geotechnical engineering education,” Geotechnical Testing Journal, 26(2),
201-209.
Hwang, J.,
Dewoolkar, M., and Ko, H-Y. (2002), “Stability analysis of two-dimensional
excavated slopes considering strength anisotropy,” Canadian Geotechnical Journal,
39, 1026-1038.
Dewoolkar M. M.,
Ko, H. Y., and Pak, R. Y. S. (2001). “Seismic behavior of cantilever retaining
walls with liquefiable backfills,” Journal of Geotechnical and Geoenvironmental
Engineering, 127(5), 424-435.
Dewoolkar, M.
M., Ko, H. Y., and Pak, R. Y. S. (2000), “Experimental developments for
studying static and seismic behavior of retaining walls with liquefiable
backfills," Soil Dynamics and Earthquake Engineering, 19(8), 583-594.
Dewoolkar, M.
M., Ko, H. Y., and Pak, R. Y. S. (1999), “Centrifuge modelling of models of
seismic effects on saturated earth structures,” Geotechnique, 49(2), 247-266.
Dewoolkar, M.
M., Ko, H. Y., Stadler, A. T., and Astaneh, S. M. F. (1999), “A substitute pore
fluid for seismic centrifuge modeling,” Geotechnical Testing Journal, 22(3),
196-210.
Dewoolkar, M. M.
(2011), NSF Sponsored Department-Level Reform Initiative, Advances in
Engineering Education, 2(4), 1.
Invited
Publications
Huston, D. R.,
Burns, D. C., and Dewoolkar, M. M. (2014), “Integration of automated and
robotic systems with BIM for comprehensive structural assessment,” 6WCSCM (6th
World Conference of the Association for Structural Control and Monitoring, July
15-17, Barcelona, Spain. (Invited lecture)
Rizzo, D. M.,
Dewoolkar, M. M., and Hayden, N. J., "Transferrable skills development in
engineering students: analysis of service-learning impact," Book Chapter
in Philosophy and Engineering: Reflections on Practice, Principles and Process,
P. Vermaas and D. Michelfelder (eds.), Springer Press, accepted.
Dewoolkar, M.
M., Huzjak, R. J., and Castro, G. (2005) “Application of finite element
analysis in the geotechnical design aspects of a new earth dam,” ASDSO The
Journal of Dam Safety, March, 29-39.
Ko, H. Y. and
Dewoolkar, M. M. (1998), “Modeling liquefaction in centrifuges,” International
Workshop on the Physics and Mechanics of Soil Liquefaction, Lade & Yamamuro
(eds), Balkema, Rotterdam, September, 307-322.
Dewoolkar, M. M.
and Ko, H. Y. (1998), “A study of seismic effects on retaining walls and
philosophies behind centrifuge modeling,” Proceedings of the Fifth U.S.-Japan
Workshop on Geotechnical Earthquake Engineering: Soil Dynamics Studies by Use
of Centrifuge, Tokyo, Japan.
Peer
Reviewed Conference Publications
Hamshaw, S. D., Bryce,
T., O’Neil Dunne, J., Rizzo, D. M., Frolik, J., Engel, T., and Dewoolkar, M. M. (2017),
“Quantifying streambank erosion using unmanned aerial systems at the
site-specific and river network scales,” GeoCongress 2017.
Akimana, R. M.,
Bista, H., Seo, Y., Li, L., Howard, L. J., Dewoolkar, M. M., and Hu, L.-B.
(2016) “Multi-scale experimental and numerical study of microbially induced
calcite precipitation in sandy soils: preliminary evidences and observations,”
GeoChina 2016.
Anderson, I.,
Rizzo, D., Huston, D., and Dewoolkar, M. M. (2015), "System-wide
assessment of vulnerability of bridges to scour under extreme flood
events," 7th Int. Conf. on Structural Health Monitoring of Intelligent Infrastructure,
Torino, Italy.
Lens, J. E., and
Dewoolkar, M. M. (2015), "Are there gender differences in the value that
civil and environmental engineering students place on service provided through
service-learning projects?" GeoCongress 2015, San Antonio, Texas.
Edwards, M.,
Dewoolkar, M. M., and Huston, D. (2014), "Characterization of Fillite as a
potential Martian regolith simulant," Earth and Space 2014, 14th ASCE
International Conf. on Engineering, Science, Construction and Operations in
Challenging Environments.
Borg, J.,
Dewoolkar, M. M., and Bierman, P. (2014), "Assessment of streambank
stability - a case study," Geo-Congress 2014, pp. 1007-1016.
Anderson, I. A.,
Dewoolkar, M. M., Rizzo, D. M., and Huston, D. R. (2014), "Vermont bridge
scour rating analysis: looking toward utilizing geomorphic stream data,"
Geo-Congress 2014, pp. 2665-2674.
Anderson, O.,
Dewoolkar, M. M., Hargy, J., and de Alba, P. (2014), "Measurement of
post-earthquake strength of liquefiable soils in centrifuge models," 8th
International Conf. Physical Modeling in Geotechnics, Perth, Australia.
Suozzo, M. J.,
and Dewoolkar, M. M. (2012), "Long-term field monitoring and evaluation of
maintenance practices of porous concrete pavements in Vermont," TRB Annual
Meeting, Paper 12-3978 (recommended and accepted for TRR).
Berry, B.,
Suozzo, M. J., Anderson, I. A., and Dewoolkar, M. M. (2012), "Properties
of pervious concrete incorporating recycled concrete aggregate", TRB
Annual Meeting. paper 12-3994.
Dewoolkar, M.
M., Lens, J. E., and Hayden, N. J. (2012), "Service-learning design
projects to enhance geotechnical engineering education", GeoCongress 2012
Conference, Oakland, CA.
Anderson, I.,
Hargy, J., de Alba, P., and Dewoolkar, M. M. (2012), "Measurement of
residual strength of liquefied soil in centrifuge models," GeoCongress
2012 Conference, Oakland, CA.
Hayden , N. J.,
Rizzo, D. M., Dewoolkar, M. M., Oka, L. G., and Neumann, M. (2010),
"Incorporating systems thinking and sustainability within civil and
enviornmental engineering curricula at UVM," ASEE St. Lawrence Section
Meeting, RIT, March 26 and 27.
McCain, G. N.
and Dewoolkar, M. M. (2010), “Strength and permeability characteristics of
porous concrete pavements,” Transportation Research Board 2009 Annual
Meeting, 2010 - publication and presentation, recommended for TRR
publication.
McCain, G. N.,
Suozzo M. J., and Dewoolkar, M. M., (2010) “A laboratory study on the effects
of winter surface applications on the hydraulic conductivity of porous concrete
pavements,” Transportation Research Board 2009 Annual Meeting, 2010 -
publication and poster presentation.
George, L. A.,
Dewoolkar, M. M., and Wei, C. (2008) "A device for simultaneous
measurement of acoustic and hydraulic properties of unsaturated soils,"
Proceedings of the First European Conference on Unsaturated Soils, E-UNSAT,
Toll G., Augarde, Gallipoli, and Wheeler (eds), July 2-4, 2008, Durham, UK,
97-102.
Dewoolkar, M.
M., George, L. A., and Hayden, N. J. (2008), “Research-based and service-learning
modules for undergraduate geotechnical engineering courses,” GeoCongress 2008,
Geosustainability and Geohazard Mitigation, ASCE Geotechnical Special
Publication No. 178, Reddy, Khire, and Alshawabkeh (eds), March 9-12, New
Orleans, Louisiana, 813-820.
Porter, D.,
Dewoolkar, M. M., and Hayden, N. J. (2008), “The role of service-learning in
heritage preservation and engineering education,” 6th International Conference
on Structural Analysis of Historical Construction, SAHC08, D’Ayala and Fodde (eds),
July 2-4, Bath, United Kingdom, Vol. 2, 1369-1374.
Oka, L. G., and
Dewoolkar, M. M. (2007), “Effect of existing dams on liquefaction potential
analysis of foundation soils,” GeoDenver 2007 New Peaks in Geotechnics, Dynamic
Response and Soil Properties, ASCE Geotechnical Special Publication No. 160,
Dewoolkar and Koester (eds).
Wei, C. and
Dewoolkar, M. M. (2006), “A deductive scheme for modeling hysteresis of
capillarity,” Unsaturated Soils 2006, ASCE Geotechnical Special Publication No.
147, Miller, Zapata, Houston & Fredlund (eds), Carefree, Arizona,
2420-2431.
Wei, C. and
Dewoolkar, M. M. (2006), “A continuum theory of immiscible two-phase flow
through porous media with dynamics and hysteresis of capillarity,” Advances in
Unsaturated Soil, Seepage, and Environmental Geotechnics, Proceedings of
Sessions of GeoShanghai, ASCE Geotechnical Special Publication No. 148, Lu,
Hoyos and Reddi (eds), Shanghai, 246-254.
Dewoolkar, M.
M., Hwang, J., and Ko, H. Y. (2006), “Lateral stability of offshore skirted gravity
structures,” Int. Conf. on Physical Modeling in Geotechnics, Ng, Zhang and Wang
(eds), Hong Kong, 631-637.
Dewoolkar, M.
M., Santichaianant, K., Ko, H. Y., and Goddery, T. (2000), “Effects of
sinkholes on earth dams,” Slope Stability 2000, ASCE Geotechnical Special
Publication No. 101, Griffiths, Fenton and Martin (eds), Denver, Colorado,
129-141.
Dewoolkar, M.
M., Ko, H. Y., and Pak, R. Y. S. (1998), “Effect of flexural stiffness on
static and dynamic behavior of cantilever retaining walls," Geotechnical
Earthquake Engineering and Soil Dynamics III, ASCE Special Publication No. 75,
Vol. 2, Dakoulas, Yegian and Holtz (eds), Seattle, Washington, 1083-1094.
Dewoolkar, M.
M., Ko, H. Y., Pak, R. Y. S., and Chan, A. H. C. (1998), “Duxseal boundary in
retaining wall configuration,” ISSMFE Centrifuge 98, Kimura, Kusakabe and
Takemura (eds), Tokyo, Japan, 123-128.
Dewoolkar, M.
M., Ko, H. Y., and Pak, R. Y. S. (1998), “Suitability of total stress gages for
static and dynamic soil pressure measurements,” ISSMFE Centrifuge 98, Kimura,
Kusakabe and Takemura (eds), Tokyo, Japan, 129-134.
Stadler, A. T.,
Dewoolkar, M. M., Ko, H. Y., and Pak, R. Y. S. (1995), “Seismic earth pressure
studies on a cantilever retaining wall by centrifuge modeling," Proceedings of
IS-TOKYO'95, First International Conference on Earthquake Geotechnical
Engineering, Vol. 2, Ishihara (ed), Tokyo, Japan, 14-16 November, 723 - 728.
Stadler, A. T.,
Dewoolkar, M. M., Ko, H. Y., and Pak, R. Y. S. (1995), “Centrifuge modeling of
a cantilever retaining wall subjected to seismic loads," Proceedings of 10th
Conference, Engineering Mechanics, Vol. 1, Sture (ed), Boulder, Colorado,
U.S.A., May, 273-276.
Dewoolkar, M.
M., Stadler, A. T., Batiste, S. N., Ko, H. Y., and Pak, R. Y. S. (1995),
“Dynamic centrifuge experiment on a cantilever retaining wall,” 3rd Int.
Conf. on Recent Advances in Geotechnical Earthquake Engineering and Soil
Dynamics, Vol. 3, Prakash (ed), 273-276.