Home PrintPrevious Next

Go button

The Go button has the following functions:
• 
Cancel printing
Cancel only the printing job:
While printing press the Go button for about 4 seconds until all the LEDs light up. The Ready and Error LEDs will flash as the job is being canceled.
Cancel all the received jobs:
To delete all jobs, press the Go button for about 4 seconds until all the LEDs light up and then release it. Press the Go button again. The Ready and Error LEDs will flash as the job is being canceled.
• 
Wake-up
If the printer is in sleep mode, press the Go button to wake the printer up and go to the Ready state.
• 
Error recovery
If there is an error, the printer will recover automatically from some errors. If an error is not automatically cleared, press the Go button to clear the error, and then continue to use the printer.
• 
Form feed
If the blue Ready LED blinks for a long time, press the Go button. The printer will print any data that is left in the printer’s memory.
• 
Reprint
To reprint the last document, press the Go button for about 4 seconds until all the LEDs light up and then release it. Within 2 seconds press the Go button the number of times you want to reprint. If you don’t press the Go button within 2 seconds, a single copy will be printed.

Print a test page

You can use the Go button or the printer driver to print a test page.

Using the Go button

1
Turn off the printer.
2
Make sure that the front cover is closed and the power cord is plugged in.
3
Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Error LEDs light up. Release the Go button. Make sure that the Toner, Drum and Error LEDs are off.
4
Press the Go button again. The printer will print a test page.
Page Top

Using the printer driver

If you are using the Windows® printer driver, click the Print Test Page button in the General tab of the printer driver.
Screen
Page Top
Home PrintPrevious Next