;{CR10X}

;  This program is for the I8 inlet set
;  Configured for 23 total TC channels
;                 BATTERY and PANEL (REF)
;                 3h (180min) between samples

*Table 1 Program
  01: 60.0000   Execution Interval (seconds)

;  CHECK: Make sure time unit is correct (0)
;         Set sample interval as desired (2)
1:  If time is (P92)
 1: 0        Minutes (Seconds --) into a
 2: 180      Interval (same units as above)
 3: 30       Then Do

;  NOTE: Panel temp is sufficient for REF.
;        See CR10x manual 13-14
2:  Internal Temperature (P17)
 1: 34       Loc [ Panel     ]

3:  Do (P86)
 1: 41       Set Port 1 High

;  CHECK: Set loop count to 1/2 #TC and round UP
;         to next integer
4:  Beginning of Loop (P87)
 1: 0        Delay
 2: 12       Loop Count

5:  Do (P86)
 1: 72       Pulse Port 2

6:  Step Loop Index (P90)
 1: 2        Step

7:  Thermocouple Temp (DIFF) (P14)
 1: 2        Reps
 2: 21       2.5 mV 60 Hz Rejection Range
 3: 1        DIFF Channel
 4: 1        Type T (Copper-Constantan)
 5: 34       Ref Temp (Deg. C) Loc [ Panel     ]
 6: 1     -- Loc [ TCdata_1  ]
 7: 1        Mult
 8: 0        Offset

8:  End (P95)

9:  Batt Voltage (P10)
 1: 33       Loc [ Battery   ]

10:  Do (P86)
 1: 51       Set Port 1 Low

11:  Do (P86)
 1: 10       Set Output Flag High (Flag 0)

12:  Real Time (P77)
 1: 1110     Year,Day,Hour/Minute (midnight = 0000)

;   CHECK: Set Reps to number of actual TCs
13:  Sample (P70)
 1: 23       Reps
 2: 1        Loc [ TCdata_1  ]

;   This instruction saves BATTERY and PANEL ToC
14:  Sample (P70)
 1: 2        Reps
 2: 33       Loc [ Battery   ]

15:  End (P95)

*Table 2 Program
  01: 0.0000    Execution Interval (seconds)

*Table 3 Subroutines

End Program

-Input Locations-
1 TCdata_1  5 1 1
2 TCdata_2  17 1 1
3 _________ 1 1 0
4 _________ 1 1 0
5 _________ 1 1 0
6 _________ 0 0 0
7 _________ 0 0 0
8 _________ 0 0 0
9 _________ 0 0 0
10 _________ 0 0 0
11 _________ 0 0 0
12 _________ 0 0 0
13 _________ 0 0 0
14 _________ 0 0 0
15 _________ 0 0 0
16 _________ 0 0 0
17 _________ 0 0 0
18 _________ 0 0 0
19 _________ 0 0 0
20 _________ 0 0 0
21 _________ 0 0 0
22 _________ 0 0 0
23 _________ 0 0 0
24 _________ 0 0 0
25 _________ 0 0 0
26 _________ 0 0 0
27 _________ 0 0 0
28 _________ 0 0 0
34 Panel     1 2 1
33 Battery   1 1 1
35 _________ 0 0 0
36 _________ 0 0 0
37 _________ 0 0 0
38 _________ 0 0 0
39 _________ 0 0 0
-Program Security-
0
0
0
-Mode 4-
-Final Storage Area 2-
0
-CR10X ID-
0
-CR10X Power Up-
2