You are not currently logged into the website.                                                                                    

You are here

Evaluation of Strength and Hydraulic Testing Methods of Pervious Concrete

TitleEvaluation of Strength and Hydraulic Testing Methods of Pervious Concrete
Publication TypeJournal Article
JournalACI Materials Journal
Publication Year2014
Publication Date1/2014
Volume111
Issue1
AuthorsSuozzo, M, Dewoolkar, MM
ISSN0889-325X
AbstractVarious methods for compressive strength and hydraulic testing for pervious concrete were investigated. No statistically significant differences were found in compressive strength measurements between elastomeric pad- and sulfur-capped specimens; due to the simpler preparation method, elastomeric pad capping is recommended. Statistically significant differences were observed in compressive strength measurements between specimens with a length-diameter ratio (L D) of 2:1 and 1.5:1. Specimens with an L D of 1:1 produced inconsistent strength measurements. Hydraulic conductivity correlated linearly to the infiltration rates from single ring, double ring and falling head infiltrometers, and was smaller than the infiltration rates by factors of 1.8, 1.5, and 9.0, respectively, for 6 in. (152 mm) thick pervious concrete. The falling head infiltrometer can be used for a quick estimate of infiltration rate; if used, its measurement can be divided by 5 to estimate infiltration rate from the single ring infiltrometer.
DOI10.14359/51686444
Short TitleMJ
Status: 
Published
Attributable Grant: 
RACC
Grant Year: 
Year3