You are not currently logged into the website.                                                                                    

You are here

Measurement of Residual Strength of Liquefied Soil in Centrifuge Models

TitleMeasurement of Residual Strength of Liquefied Soil in Centrifuge Models
Publication TypeConference Paper
Conference NameGeoCongress 2012GeoCongress 2012
Publication Year2012
Pagination1740 - 1749
AuthorsAnderson, I, Hargy, J, de Alba, P, Dewoolkar, MM
EditorHryciw, RD, Athanasopoulos-Zekkos, A, Yesiller, N
PublisherAmerican Society of Civil Engineers
Conference LocationOakland, California, United StatesReston, VA
978-0-7844-1212-1
AbstractA technique for measuring the evolution of shear strength of liquefiable soils in physical models as earthquake-induced pore pressures change is desirable. It was envisioned that the shear strength of liquefying sands can be measured in-flight in a seismic geotechnical centrifuge model by pulling thin coupons (plates) horizontally through the soil models. The large strains and strain rates associated with liquefaction flow failures would thus be simulated by moving the coupon relative to the sand before, during, and after shaking. This paper presents the experimental details and results of seismic centrifuge tests on models of saturated F-75 sand that were used to make such measurements. It is shown that by measuring the drag force on the coupon, it is possible to observe the evolution of the soil shear strength as it decreases to a minimum (residual strength) and subsequently increases as excess pore pressures dissipate.
URLhttp://ascelibrary.org/doi/abs/10.1061/9780784412121.179
DOI10.1061/9780784412121.179
Status: 
Published
Attributable Grant: 
RACC
Grant Year: 
Year2